Key Performance Specifications

Input channels

• 4 FlexChannel® inputs
• Each FlexChannel provides:
  • One analog signal that can be displayed as a waveform view, a spectral view, or both simultaneously
  • Eight digital logic inputs with TLP058 logic probe

Bandwidth (all analog channels)

• 1 GHz, 2.5 GHz, 4 GHz, 6 GHz, 8 GHz (upgradable)

Sample rate (all analog / digital channels)

• Real-time: 25 GS/s
• Interpolated: 2.5 TS/s

Record length (all analog / digital channels)

• 5 Mpoints standard
• 125, 250, 500 Mpoints , or 1 Gpoints (optional)

Waveform capture rate

• >500,000 waveforms/s

Vertical resolution

• 12-bit ADC
• Up to 16-bits in High Res mode

Standard trigger types

• Edge, Pulse Width, Runt, Timeout, Window, Logic, Setup & Hold, Rise/Fall Time, Parallel Bus, Sequence, Visual Trigger, Video (optional), RF vs. Time (optional)
• Auxiliary Trigger ≤5 VRMS, 50Ω, 400 MHz (Edge Trigger only)

Standard analysis

• Cursors: Waveform, V Bars, H Bars, V&H Bars
• Measurements: 36
• Spectrum View: Frequency-domain analysis with independent controls for frequency and time domains
• FastFrameTM: Segmented memory acquisition mode with maximum trigger rate >5,000,000 waveforms per second
• Plots: Time Trend, Histogram, Spectrum and Phase Noise
• Math: Basic waveform arithmetic, FFT, and advanced equation editor
• Search: Search on any trigger criteria
• Jitter: TIE and Phase Noise

Optional analysis

• Advanced Jitter and Eye Diagram Analysis
• Advanced Spectrum View
• RF vs. Time traces (magnitude, frequency, phase)
• Digital Power Management
• Mask/Limit Testing
• LVDS Debug and Analysis
• PAM3 Analysis
• Advanced Power Measurements and Analysis

Optional serial bus trigger, decode and analysis

• I2C, SPI, I3C, RS-232/422/485/UART, SPMI, CAN, CAN FD, LIN, FlexRay, SENT, PSI5, Automotive Ethernet, USB 2.0, eUSB2, Ethernet, Audio, MIL-STD-1553, ARINC 429, Spacewire, 8B/10B, NRZ, SVID, MDIO

Optional serial compliance test

• Ethernet, USB 2.0, Automotive Ethernet, Industrial Ethernet, MIPI D-PHY 1.2

Optional memory analysis

• DDR3 debug, analysis, and compliance test

Arbitrary/Function Generator1

• 50 MHz waveform generation
• Waveform Types: Arbitrary, Sine, Square, Pulse, Ramp, Triangle, DC Level, Gaussian, Lorentz, Exponential Rise/Fall, Sin(x)/x, Random Noise, Haversine, Cardiac

Digital voltmeter2

• 4-digit AC RMS, DC, and DC+AC RMS voltage measurements

Trigger frequency counter2

• 8-digit

Display

• 6-inch (396 mm) TFT color
• High Definition (1,920 x 1,080) resolution
• Capacitive (multi-touch) touchscreen

Connectivity

• USB Host (7 ports), USB 3.0 Device (1 port), LAN (10/100/1000 Base-T Ethernet), Display Port, DVI-I, VGA

e*Scope®

• Remotely view and control the oscilloscope over a network connection through a standard web browser

Warranty

• 3 years standard

Dimensions

• • 2 in (309 mm) H x 17.9 in (454 mm) W x 8.0 in (204 mm) D
  • Weight: <28.4 lbs. (12.88 kg)